Seagate Central Blinking Green Light Issue - Troubleshoot

hard drive light blinking

Seagate Central is an external storage device that enables you to store and transfer many files at a considerable speed. Seagate Central Blinking Green Light denotes that the device undergoes the process of powering on. If the cable is connected correctly, especially the Ethernet cable, it will take about 7 – 10 minutes.

Steps To Fix Seagate Blinking Light

Blinking Green Light On The Central's Top

Generally, when there is a hard drive light blinking, it takes about 3 – 4 minutes for booting up. If it takes more than 7 minutes, check the Ethernet cable to fix the blinking issue. Make sure that you connect the Ethernet cable to another LAN port of the router and power on the drive. If the seagate central flashing green light of death persists, disconnect the power supply and reconnect it after few minutes.

A Solid Green Led Light Is Seen, But The Device Is Not Detected

Check whether the Seagate Central device is connected to the same Wi-Fi router to which the computer is connected. In case you have more than one router, then there is a chance that Seagate Central can easily get connected to that router.

Try using another computer. If Seagate Central is visible from the other device, then there must be a problem that revolves around your original computer.

Log In to your router’s administration page and check whether the Seagate Central drive is listed on the screen. If not, try disconnecting the Seagate drive by unplugging the power cable. Reboot the router after 30 seconds. Now, reconnect the power supply and connect the Seagate Central drive to the router. Now check whether the seagate external hard disk light blinking but not detecting issue is fixed or not.

The Router Sees The Drive, But The Computer Does Not Detected

The computer needs to ping the drive, and it requires the Seagate Central hostname, which will be available on the label of the drive. Make sure that you know the Hostname, which contains six-digit numbers.

  • Press Windows + R to open the Run dialog box.
  • Type cmd in the search bar.
  • The Command prompt window will pop up on the desktop.
  • Type ping Seagate (hostname) in the Command prompt window and press Enter.
  • The IP address for Seagate Central will be provided, which helps to connect your computer with the Seagate Central drive.

From this article, you have the solution for seagate external hard disk light blinking but not detecting issue. To get more assistance on fixing Seagate Central Blinking Green Light issue, CALL our tech experts and get instant solution. Also you can learn here, How To Solve Seagate 5tb External Hard Drive Blinking Blue Light issue.

Call Us
Copyright © 2022 - 2023 External Hard Drive Setup | All rights are reserved.