SEAGATE 6TB EXTERNAL HARD DRIVE BEEPING

Seagate 6tb External Hard Drive Beeping

Beep! Beep! Beep! Do you hear a beep sound? Don't panic because it is not a time bomb at your workplace. It could be an external hard drive.In this article, let's take a look at the Seagate 6TB external hard drive beeping problem.Usually, a hard drive doesn't beep if it works normally. Unfortunately, if you get a beeping sound from your hard drive, then you just have to look into it to avoid data loss. There could be a mechanical error in the hard drive, which is causing the beeping sound.Let's find the actual cause and troubleshoot the issue to get the hard drive back to work.

Basic troubleshooting

  • As the first step, disconnect your hard drive from the computer.
  • Check if any parts are damaged externally.
  • Make sure that the USB port is working well.
  • Use canned air to blow out the ports of your hard drive and cable.
  • Once you have cleared the dust from the hard drive, reconnect the cable to it.
  • Next, connect the hard drive to your computer and check if the problem is resolved.
  • If the beeping sound still occurs, try to connect the USB cable of the hard drive to a different port of your computer.
  • For instance, you can also try to connect the Seagate 6TB external hard drive (beeping) to a different computer.
  • If the problem persists, replace the existing USB cable with a standard one or jump to advanced troubleshooting.

Use Command Prompt to check the disk

  • On your Windows computer, open the Start menu by pressing the Windows key.
  • Input 'cmd' in the search field and select Command Prompt from the search results.
  • Click the Run as administrator button and wait until the Command Prompt is launched.
  • Alternatively, launch the Run dialog box by pressing the Windows + R shortcut keys. Type 'cmd' in the text field and press Ctrl + Shift + Enter to run Command Prompt as an administrator.
  • If the device prompts for User Account Control, click the Yes button.
  • In the Command Prompt window, input thechkdsk X :/rcommand and hit the Enter key (replace X in the command with your drive letter).
  • Once the scanning process is completed, close the Command Prompt window.
  • Remove and reconnect the beeping hard drive to your computer.

Suppose the problem remains unsolved, format the hard drive using Disk Management in Windows 10. You can also reach our technical experts for assistance in resolving the Seagate 6TB external hard drive, which is beeping annoyingly loud.

Call Us
Copyright © 2022 - 2023 External Hard Drive Setup | All rights are reserved.