SOLVED - Seagate 5tb External Hard Drive Blinking Blue Light

Seagate 5tb External Hard Drive Blinking Blue Light

On this page, you’re going to see why the Seagate 5TB external hard drive blinking blue light. Generally, you can check the current status of your external hard drive by identifying the behavior of the LED on it. Usually, when the drive turns on, you can see the green LED blinking on it. Similarly, when the drive encounters an error, the solid red LED is displayed on its panel. The behavior of the LEDs might vary based on the drive model.

Basically, when a drive is connected to your computer securely, you can find the solid blue LED on its panel. The blinking blue light indicates the files or documents are beginning transferred to the drive. In short, the blinking blue LED means the drive is performing an activity. Once the activity is finished, the blinking blue light will disappear on your drive. 

In case you find Seagate 5TB external hard drive blinking blue light, even after the completion of the activity, then try these simple troubleshooting instructions to fix it.

  • Initially, check if your drive is connected to the computer securely. If not, connect it securely.
  • Next, make sure that your computer is not in sleep mode.
  • Now, unplug the drive from your computer.
  • Disconnect the drive from the power source and turn it off.
  • Similarly, turn off your computer and disconnect its power cable from the electrical outlet.
  • Wait for 60 seconds.
  • Now, reconnect the computer and your drive to the power source.
  • Turn on the computer followed by the drive.
  • Check whether your drive is detected by the computer. If yes, begin the file transfer process. Wait for the ongoing file transfer process to complete and check its LED status.
  • If the Seagate 5TB external hard drive blinking blue light, then contact our technical support team to fix it.
Call Us
Copyright © 2022 - 2023 External Hard Drive Setup | All rights are reserved.